— Q3 Revenue at High-End of Guidance Range; Gross Profit Margin of 26.5% Exceeds Guidance Range —

SEOUL, South Korea and SAN JOSE, Calif., Oct. 23, 2019 /PRNewswire/ — MagnaChip Semiconductor Corporation (NYSE: MX) today announced financial results for the third quarter of 2019.

Q3 2019 Summary

Revenue of $229.7 million at high-end of guidance range of $220-230 million; Q3 revenue up 11.5% Year-over-Year (YoY); up 12% Quarter-over-Quarter (QoQ)
Standard Products Group (SPG) revenue of $139.2 million, up 14.1% YoY; up 5.5% QoQ
Display standard products revenue of $90.6 million, up 16.7% YoY; up 7.5% QoQ
OLED display driver IC revenue of $78.3 million up 34.2% YoY; up 7.2% QoQ
Power standard products revenue of $48.7 million, up 9.5% YoY; up 2.0% QoQ
Foundry Services Group (FSG) revenue of $90.3 million, up 7.7% YoY; up 23.6% QoQ
Total gross profit margin (GPM) of 26.5% exceeded the guidance range of 22-24%; GPM was 27.1% in Q3 2018; 21.4% in Q2 2019

Fourth Quarter 2019 Business Outlook
MagnaChip anticipates:
Normal seasonal softness in revenue but improvement from the fourth quarter of 2018. Revenue is expected to be in the range of $181 million to $191 million, down 19% at the mid-point of the projected range when compared with revenue of $229.7 million in the third quarter of 2019, and up 3.7% year-over-year when compared to revenue of $179.4 million in the fourth quarter of 2018.
Gross profit margin to be in the range of 24% to 26%, when compared to 26.5% in the third quarter of 2019 and 24.5% in the fourth quarter of 2018. Gross margin guidance for the fourth quarter reflects the current expectation that fab utilization will show an expected sequential decline from the third quarter of 2019.

CEO YJ Kim comments on Q3
Revenue of $229.7 million was the highest quarterly level achieved since we went public in 2011. Our Display and Power businesses both had record quarterly revenue, and Foundry revenue was at the highest level in five years. Demand continued to be robust for our OLED display drivers, as revenue increased over 34% year-over-year and over 7% sequentially.

We were awarded a record 11 new design wins for OLED display drivers in Asia, including three for mid-range smartphones from a major smartphone maker in Korea. Of the 11 design wins, seven were for display drivers in our 40-nanometer product family and four were for our new and lowest-power 28-nanometer display drivers. Smartphone makers in Asia launched a total of six high-end and mid-range models using our OLED display drivers. Our Power business showed sequential growth and the Foundry business showed sharp sequential growth, as customer demand was strong, particularly from the smartphone and computing segments.

Strategic Evaluation Process
“I’m pleased to report that we continue to make substantial progress on our previously announced strategic evaluation process of the Foundry business and Fab 4, including discussions with multiple interested parties toward a possible sale of the business as well as consideration of accretive business conversions, joint ventures and partnerships,” said YJ Kim, CEO. “As stated previously, our decisions regarding the outcome of the various options of the strategic evaluation process will be guided by what the management and Board consider to be the best available path to improve MagnaChip’s profitability and to maximize shareholder value.”

CFO Jonathan Kim comments on Q3
Total revenue came in at the high-end of our guidance range, as Display, Power and Foundry all showed year-over-year and sequential revenue growth. Gross profit margin of 26.5% in Q3 exceeded our guidance range due primarily to higher-than-expected fab utilization, mainly as a result of a significant increase in Foundry revenue.

Cash and cash equivalents totaled $131.3 million, up sequentially from $123.8 million, and net operating cash flow was $12.9 million, marking the second consecutive quarter of net positive operating cash flow.

Third Quarter Financial Review
Total Revenue

Total revenue in the third quarter was $229.7 million, up 11.5% as compared to reported revenue of $206 million from the third quarter of 2018, and up 12.0% from $205.1 million in the second quarter of 2019.

Segment Revenue
Foundry Services Group revenue in the third quarter was $90.3 million, up 7.7% from the third quarter of 2018, and up 23.6% sequentially. Standard Products Group revenue in the third quarter was $139.2 million, up 14.1% from the third quarter of 2018, and up 5.5% sequentially.

Total Gross Profit and Gross Profit Margin
Total gross profit in the third quarter of 2019 was $60.9 million or 26.5% as a percentage of revenue, as compared with gross profit of $55.7 million or 27.1% as a percentage of revenue in the third quarter of 2018, and $43.8 million or 21.4% as a percentage of revenue in the second quarter of 2019.

Segment Gross Profit Margin
Foundry Services Group gross profit margin was 28.3% as compared with 24.4% in the third quarter of 2018 and 16.7% in the second quarter of 2019. The YoY and sequential improvement in the Foundry Services Group’s gross profit margin was primarily due to an increase in Foundry revenue, an improved product mix and also higher fab utilization. The Standard Products Group gross profit margin was 25.3% as compared with 28.8% in the third quarter of 2018 and 23.9% in the second quarter of 2019. The sequential improvement in the Standard Products Group’s gross profit margin was due primarily to an increase in fab utilization. The sequential improvement as well as a YoY decline in the Standard Product Group’s gross profit margin was due to an increase in fab utilization that benefited Power and non-OLED products manufactured in-house, but the gain was offset by temporarily lower wafer yields from external suppliers on OLED products that recently entered production.

Operating Income, Net Income, Adjusted Net Income, Adjusted EBITDA
Operating income was of $25.9 million for the third quarter of 2019, as compared to operating income of $18.3 million in the third quarter of 2018 and operating income of $6.7 million for the second quarter of 2019.

Net loss, on a GAAP basis, was $1.6 million or $0.05 cents per basic and diluted share in the third quarter of 2019 as compared with a net income of $17.2 million or $0.50 per basic share and $0.41 per diluted share in the third quarter of 2018 and net loss of $9.5 million or $0.28 per basic and diluted share in the second quarter of 2019.

Adjusted Net Income, a non-GAAP financial measure, totaled $20.9 million or $0.61 per basic share and $0.49 per diluted share in the third quarter of 2019, as compared to Adjusted Net Income of $13.3 million or $0.38 per basic share and $0.32 per diluted share in the third quarter of 2018 and Adjusted Net Income of $2.9 million or $0.08 per basic and diluted share in the second quarter of 2019.

Adjusted EBITDA, a non-GAAP financial measure, was $35.5 million or 15.4% of revenue in the third quarter of 2019 as compared to Adjusted EBITDA of $27.9 million or 13.5% of revenue in the third quarter of 2018 and Adjusted EBITDA of $17.0 million or 8.3% of revenue in the second quarter of 2019.

Management believes that non-GAAP financial measures, when viewed in conjunction with GAAP results, can provide a meaningful understanding of the factors and trends affecting MagnaChip’s business and operations and assist in evaluating our core operating performance. However, such non-GAAP financial measures have limitations and should not be considered as a substitute for net income or as a better indicator of our operating performance than measures that are presented in accordance with GAAP. A reconciliation of GAAP results to non-GAAP results is included in this press release.

Cash and cash equivalents totaled $131.3 million in the third quarter, up from $123.8 million in the second quarter of 2019.

Third Quarter 2019 and Recent Company Highlights
MagnaChip announced:

Its cumulative shipments of OLED DDICs (Display Driver ICs) surpassing the 500 million milestone. OLED display drivers are low-power devices that offer excellent screen resolution with deep and bright colors for mobile screens that do not require a backlight, They also enable full-screen, rounded edges and thinner and lighter smartphones. MagnaChip first introduced the OLED DD IC in 2003 and began mass production in 2007.
http://investors.magnachip.com/news-releases/news-release-details/magnachip-surpasses-500-million-milestone-cumulative-shipments

Offering of 0.35 micron 700V Ultra-High Voltage process technologies (UHV) suitable for different system requirements for AC-DC converter ICs and LED driver ICs. Currently the market demand is increasing dramatically for AC-powered products, including LED lighting drivers, AC-DC converter ICs and AC-DC chargers commonly found in home appliances. Due to increased competition, the cost competitiveness of these products, manufactured using UHV technologies, is becoming a critical consideration for IC providers.
http://investors.magnachip.com/news-releases/news-release-details/magnachip-offers-035-micron-700v-ultra-high-voltage-process-1

The release of a 100V Mid-Voltage MOSFET (Metal Oxide Semiconductor Field-Effect Transistor) with a new thermal package (“M2PAK-7P”) designed for the fast-growing e-Bike market. This MOSFET with the M2PAK-7P package is suitable to meet the particular requirements of electric bike (e-Bike) systems. E-Bikes, an emerging trend along with electric scooters, have become an integral part of new eco-friendly wave of transportation and represents a “green personal mobility” movement in large urban markets.
http://investors.magnachip.com/news-releases/news-release-details/magnachip-targets-fast-growing-e-bike-market-high-performance

Third Quarter 2019 Earnings Conference Call
The earnings conference call will be webcast live today (October 23, 2019) at 5:00 p.m. ET, and also is available by dialing toll-free at 1-844-536-5472. International call-in participants can dial 1-614-999-9318. The conference ID number is 4069039. Participants are encouraged to initiate their calls at least 10 minutes in advance of the 5 p.m. ET start time to ensure a timely connection. The webcast and earnings release will be accessible at www.magnachip.com. A replay of the conference call will be available the same day and will run for 72 hours. The replay dial-in numbers are 1-404-537-3406 or toll-free at 1-855-859-2056. The access code is 4069039.

About MagnaChip Semiconductor Corporation
MagnaChip is a designer and manufacturer of analog and mixed-signal semiconductor platform solutions for communications, IoT, consumer, industrial and automotive applications. The Company’s Standard Products Group and Foundry Services Group provide a broad range of standard products and manufacturing services to customers worldwide. MagnaChip, with about 40 years of operating history, owns a portfolio of approximately 3,000 registered patents and pending applications, and has extensive engineering, design and manufacturing process expertise. For more information, please visit www.magnachip.com. Information on or accessible through, MagnaChip’s website is not a part of, and is not incorporated into, this release.

Safe Harbor for Forward-Looking Statements
Information in this release regarding MagnaChip’s forecasts, business outlook, expectations and beliefs are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995 that involve risks and uncertainties. These statements include statements about our future operating and financial performance, including but not limited to fourth quarter 2019 revenue and gross profit margin expectations. All forward-looking statements included in this release are based upon information available to MagnaChip as of the date of this release, which may change, and we assume no obligation to update any such forward-looking statements. These statements are not guarantees of future performance and actual results could differ materially from our current expectations. Factors that could cause or contribute to such differences include general economic conditions, the impact of competitive products and pricing, timely design acceptance by our customers, timely introduction of new products and technologies, ability to ramp new products into volume production, industry wide shifts in supply and demand for semiconductor products, industry and/or company overcapacity, effective and cost efficient utilization of manufacturing capacity, financial stability in foreign markets and the impact of foreign exchange rates, unanticipated costs and expenses or the inability to identify expenses which can be eliminated, compliance with U.S. and international trade and export laws and regulations by us and our distributors, the risk that the strategic evaluation and the initiatives related thereto described above are not successful, and other risks detailed from time to time in MagnaChip’s filings with the SEC, including our Form 10-K filed on February 22, 2019 and subsequent registration statements, amendments or other reports that we may file from time to time with the SEC and/or make available on our website. MagnaChip assumes no obligation and does not intend to update the forward-looking statements provided, whether as a result of new information, future events or otherwise.

CONTACTS:
In the United States:
Bruce Entin
Investor Relations
Tel. +1-408-625-1262
Investor.relations@magnachip.com

In Korea:
Chankeun Park
Director, Public Relations
Tel. +82-2-6903-5223
chankeun.park@magnachip.com

SEOUL, South Korea and SAN JOSE, Calif., Oct. 11, 2019 /PRNewswire/ — MagnaChip Semiconductor Corporation (“MagnaChip”) (NYSE: MX) announced today it will host a conference call on Wednesday, October 23, 2019 at 5 p.m. ET to discuss the Company’s financial results for the third quarter of 2019. Participating in the call will be YJ Kim, MagnaChip’s CEO and Jonathan Kim, Executive Vice President and CFO. The earnings press release will be issued after the market closes that day.

The conference call will be webcast live and also is available by dialing toll-free at 1-844-536-5472. International call-in participants can dial 1-614-999-9318. The conference ID number is 4069039. Participants are encouraged to initiate their calls at least 10 minutes in advance of the 5 p.m. ET start time to ensure a timely connection. The webcast and earnings release will be accessible at www.magnachip.com.

A replay of the conference call will be available the same day and will run for 72 hours. The replay dial-in numbers are 1-404-537-3406 or toll-free at 1-855-859-2056. The access code is 4069039.

About MagnaChip Semiconductor

MagnaChip is a designer and manufacturer of analog and mixed-signal semiconductor platform solutions for communications, IoT, consumer, industrial and automotive applications. The Company’s Standard Products Group and Foundry Services Groups provide a broad range of standard products and manufacturing services to customers worldwide. MagnaChip, with about 40 years of operating history, owns a portfolio of approximately 3,000 registered patents and pending applications, and has extensive engineering, design and manufacturing process expertise.

For more information, please visit www.magnachip.com. Information on or accessible through, MagnaChip’s website is not a part of, and is not incorporated into, this release.

CONTACTS:
In the United States:
Bruce Entin
Investor Relations
Tel. +1.408.625.1262
Investor.relations@magnachip.com

In Korea:
Chankeun Park
Director, Public Relations
Tel. +82.2.6903.3195
chankeun.park@magnachip.com

–100V MOSFET in New Package also Ideal for Electric Scooters–

SEOUL, South Korea and SAN JOSE, Calif., Sept. 24, 2019 /PRNewswire/ — MagnaChip Semiconductor Corporation (“MagnaChip” or the “Company”) (NYSE: MX), a designer and manufacturer of analog and mixed-signal semiconductor products, announced today the release of a 100V Mid-Voltage MOSFET (Metal Oxide Semiconductor Field-Effect Transistor) with a new thermal package (“M2PAK-7P”) designed for the fast-growing e-Bike market. This MOSFET with M2PAK-7P is suitable to meet the particular requirements of electric bike (e-Bike) systems.

E-Bikes, an emerging trend especially with electric scooters, have become an integral part of a new eco-friendly wave of transportation, and represent a “green personal mobility” movement in urban markets. According to market forecasters, the global e-Bike market is projected to grow at about CAGR of 9% to reach an estimated $39 billion by 2025 from an estimated $21 billion in 2018.

E-Bikes and electric scooters are powered by electric motors running on lithium-ion batteries. MagnaChip’s 100V MOSFET, featuring a best-in-class thermal package, is an essential electronic device that controls the speed of the motor and supplies a stable current of electric power to the lithium-ion Battery Management System (BMS). The 100V MOSFET is a product of MagnaChip’s Power Products Division which offers a wide range of products including a family of MOSFETS, IGBT devices, Battery FETS and Power ICs.

MagnaChip’s 100V Mid-Voltage MOSFET is especially suitable for e-Bikes requiring high power systems. With M2PAK-7P, this new MOSFET achieves a best-in-class thermal performance and a lower Rds(on)*, as compared to other MOSFET products currently on the market. It also increases the maximum operating current to 240A. These features enable a high level of operational efficiency and a secure supply of power, both of which are necessary for high-powered e-Bikes.

MagnaChip also plans to introduce 80V and 135V Mid-Voltage MOSFET products in M2PAK-7P. With this strategy, MagnaChip plans to aggressively expand its presence within the e-Bike market and become an industry leader for all power products within it.

“The emergence of e-Bike is a highly attractive opportunity for MagnaChip,” said YJ Kim, CEO of MagnaChip. “Our 100V MOSFET product in a specially-designed thermal package is designed for the particular needs of motors and lithium-ion batteries that power e-bikes like electric scooters. MagnaChip plans to launch new Mid-Voltage MOSFET products with M2PAK-7P to meet the evolving needs of this rapidly-growing consumer sector.”

For product inquiries, please contact our Power Marketing Team at PowerMKTG@magnachip.com or Power Sales Team at jake.song@magnachip.com.

Editor’s Note:* Rds(on): On resistance, the resistance value between the drain and source of a MOSFET during operation (ON).

About MagnaChip Semiconductor

MagnaChip is a designer and manufacturer of analog and mixed-signal semiconductor platform solutions for communications, IoT, consumer, industrial and automotive applications. The company’s Standard Products Group and Foundry Services Group provide a broad range of standard products and manufacturing services to customers worldwide. MagnaChip, with about 40 years of operating history, owns a portfolio of approximately 3,000 registered patents and pending applications, and has extensive engineering, design and manufacturing process expertise. For more information, please visit www.magnachip.com.

CONTACTS:

United States (Investor Relations):
Bruce Entin
Entin Consulting
Tel. +1-408-625-1262
Investor.relations@magnachip.com

USA media / industry analysts:
Mike Newsom
LouVan Communications, Inc.
Tel. +1-617-803-5385
mike@louvanpr.com

Korea / Asia media:
Chankeun Park
Director of Public Relations
Tel. +82-2-6903-5223
chankeun.park@magnachip.com

MagnaChip Semiconductor to Present at the 2019 Citi Technology Conference on September 4, 2019 in New York City

 

SEOUL, South Korea and SAN JOSE, Calif., Aug. 16, 2019 /PRNewswire/ — MagnaChip Semiconductor Corporation (“MagnaChip” or the “Company”) (NYSE: MX), a designer and manufacturer of analog and mixed-signal semiconductor platform solutions for communications, IoT, consumer, industrial and automotive applications, today announced that members of the executive management team will present to the investment community at the 2019 Citi Global Technology Conference in New York City on Wednesday, September 4 at 10:15 am EDT. The management team, including CEO YJ Kim and CFO Jonathan Kim, also will host 1:1 investor meetings with institutional investors.

An audio webcast of the presentation can be heard live on the MagnaChip website at (www.magnachip.com). The webcast link will appear in the “Investor Events” section (http://investors.magnachip.com/) under the Investors tab.

A replay of the webcast will be available one hour after the conclusion of the presentation and will be accessible on the MagnaChip website until December 4, 2019.

About MagnaChip Semiconductor Corporation
MagnaChip is a designer and manufacturer of analog and mixed-signal semiconductor platform solutions for communications, IoT, consumer, industrial and automotive applications. The Company’s Standard Products Group and Foundry Services Group provide a broad range of standard products and manufacturing services to customers worldwide. MagnaChip, with about 40 years of operating history, owns a portfolio of approximately 3,000 registered patents and pending applications, and has extensive engineering, design and manufacturing process expertise. For more information, please visit www.magnachip.com. Information on or accessible through, MagnaChip’s website is not a part of, and is not incorporated into, this release.

CONTACTS:
In the United States:
Bruce Entin
Investor Relations
Tel. +1-408-625-1262
Investor.relations@magnachip.com

In Korea:
Chankeun Park
Director, Public Relations
Tel. +82-2-6903-3195
chankeun.park@magnachip.com

SEOUL, South Korea and SAN JOSE, Calif., Aug. 5, 2019 /PRNewswire/ — MagnaChip Semiconductor Corporation (“MagnaChip” or the “Company”) (NYSE: MX), a designer and manufacturer of analog and mixed-signal semiconductor products, announced today it now offers 0.35 micron 700V Ultra-High Voltage process technologies (UHV) suitable for different system requirements for AC-DC converter ICs and LED driver ICs.

Currently, the market demand is increasing dramatically for AC-powered products, including LED lighting drivers, AC-DC converter ICs and AC-DC chargers commonly found in home appliances. As such, due to increased competition, the cost competitiveness of these products, manufactured using UHV technologies, is becoming a critical factor for IC providers. Therefore, to meet these market needs, MagnaChip has successfully reduced device sizes of UHV nLDMOS by 30% and JFET by 50% from its previous generation. Furthermore, MagnaChip’s latest UHV technology, designated as HP35ULC700, shortens the manufacturing process and reduces cost by having seven photolithographic steps less than the Company’s previous generation, which was achieved by simplifying the front end process and reducing the minimum metal number from two to one.

UHV technologies have multiple requirements because different systems and IC schemes are used in various applications. To cover various requirements, MagnaChip offers multiple UHV technologies in terms of gate oxide schemes. When high system integration is necessary, dual gate oxide UHV technology can be used that provides the optimized low voltage, high voltage, and ultra-high voltage devices. When manufacturing cost is important and control logic device density is high, low-voltage single-gate oxide UHV technology can be used. When manufacturing cost is important and superior high-voltage performance to drive external discrete high voltage MOSFETs is necessary, high voltage single-gate oxide UHV technology can be used.

In addition, UHV devices with different operation voltages from 350V to 700V are provided in MagnaChip’s UHV technologies, as AC-DC converter voltage requirements vary by country. Additional option devices that can enable the integrated solution of AC-DC converter ICs and LED driver ICs are 700V nLDMOS integrated with 700V JFET, Zener diode, 700V resistor, thin film resistor, MIM capacitance and fuse.

YJ Kim, MagnaChip’s Chief Executive Officer, commented, “UHV technology is a key technology we are focused on as market demands for LED lighting and AC-DC converters remain to be strong.” Mr. Kim added, “We are continuing to develop additional UHV technologies to improve performances and cover more system requirements.”

About MagnaChip Semiconductor
MagnaChip is a designer and manufacturer of analog and mixed-signal semiconductor platform solutions for communications, IoT, consumer, industrial and automotive applications. The Company’s Standard Products Group and Foundry Services Group provide a broad range of standard products and manufacturing services to customers worldwide. MagnaChip, with about 40 years of operating history, owns a portfolio of approximately 3,000 registered patents and pending applications, and has extensive engineering, design and manufacturing process expertise. For more information, please visit www.magnachip.com.

CONTACTS:
United States (Investor Relations):
Bruce Entin
Entin Consulting
Tel. +1-408-625-1262
Investor.relations@magnachip.com

USA media / industry analysts:
Mike Newsom
LouVan Communications, Inc.
Tel. +1-617-803-5385
mike@louvanpr.com

Korea / Asia media:
Chankeun Park
Director of Public Relations
Tel. +82-2-6903-5223
chankeun.park@magnachip.com

Company was first to begin mass production of OLED DDICs in 2007 and continues to innovate

 

SEOUL, South Korea and SAN JOSE, Calif., July 31, 2019 /PRNewswire/ — MagnaChip Semiconductor Corporation (“MagnaChip” or the “Company”) (NYSE: MX), a designer and manufacturer of analog and mixed-signal semiconductor products and a leader in OLED display, announced today the Company has surpassed the 500 million milestone in cumulative shipments of OLED DDICs (Display Driver ICs). OLED display drivers are low-power devices that offer excellent screen resolution with deep and bright colors that do not require a backlight and enable full-screen and thinner smartphones.

MagnaChip first introduced the OLED DDIC in 2003 and began mass production, using the 150- nanometer (nm) process, in 2007. The Company subsequently introduced a 110-nm driver in 2011, 55-nm in 2014, 40-nm in 2017 and a 28-nm in 2019. The Company recently taped out a third 28-nm OLED driver and seventh 40-nm OLED driver. MagnaChip intends to continue to expand the OLED display product line for smartphones and for multiple applications in the consumer, automotive, and industrial sectors. As compared to the 40-nm platform, the 28-nm product line features a reduction in footprint and a reduction in power consumption of more than 20 percent.

“MagnaChip was first to market with an OLED DDIC and we have truly helped fuel the growing adoption of OLED displays,” said YJ Kim, CEO of MagnaChip. “We now have more than 15 years of development and production experience with OLED DDICs and are committed to help meet the expected increased adoption of OLED display drivers for multiple applications across different end markets.”

MagnaChip announced an OLED Ecosystem Initiative earlier this year, and announced partnerships with three industry leaders: ELAN Microelectronics Corp., a leading provider of capacitive touch controller ICs and Melfas Inc. and HiDeep Inc., two world leaders in providing one stop Human Machine Interface (HMI) solutions. Each of these companies will collaborate with MagnaChip to develop and standardize innovative human-interface solutions based upon smart touch, stylus and fingerprint technologies that are suitable for MagnaChip’s industry leading OLED DDIC.

About MagnaChip Semiconductor

MagnaChip is a designer and manufacturer of analog and mixed-signal semiconductor platform solutions for communications, IoT, consumer, industrial and automotive applications. The company’s Standard Products Group and Foundry Services Group provide a broad range of standard products and manufacturing services to customers worldwide. MagnaChip, with about 40 years of operating history, owns a portfolio of approximately 3,000 registered patents and pending applications, and has extensive engineering, design and manufacturing process expertise. For more information, please visit www.magnachip.com.

CONTACTS:
United States (Investor Relations):
Bruce Entin
Entin Consulting
Tel. +1-408-625-1262
Investor.relations@magnachip.com

USA media / industry analysts:
Mike Newsom
LouVan Communications, Inc.
Tel. +1-617-803-5385
mike@louvanpr.com

Korea / Asia media:
Chankeun Park
Director of Public Relations
Tel. +82-2-6903-5223
chankeun.park@magnachip.com

— Q2 revenue exceeds updated guidance as OLED, Power and Foundry Show Double-Digit Sequential Growth —

SEOUL, South Korea and SAN JOSE, Calif., July 30, 2019 /PRNewswire/ — MagnaChip Semiconductor Corporation (NYSE: MX) today announced financial results for the second quarter of 2019.

Q2 2019 Summary

Revenue of $205.1 million exceeded updated guidance of “at least” $194 million provided on June 11; Q2 revenue up 2.7% Year-over-Year (YoY); up 30.4% Quarter-over-Quarter (QoQ)
Standard Products Group (SPG) revenue of $132 million, up 11.2% YoY; up 31.6% QoQ
Display standard products revenue of $84.3 million, up 7% YoY; up 44.7% QoQ
OLED display driver IC revenue of $73 million up 17.4% YoY; up 50.4% QoQ
Power standard products revenue of $47.7 million, up 19.2% YoY; up 13.5% QoQ
Foundry Services Group (FSG) revenue of $73.1 million, down 9.7% YoY; up 28.1% QoQ
Total gross profit margin of 21.4% compared to updated guidance of “at least” 21%” provided on June 11.

Third Quarter 2019 Business Outlook
For the third quarter of 2019, MagnaChip anticipates:
Revenue to be in the range of $220 million to $230 million, up 9.7% at the mid-point of the projected range when compared with revenue of $205.1 million in the second quarter of 2019, and up 9.2% year-on-year when compared to $206 million revenue recorded in the third quarter of 2018. Revenue guidance for the third quarter reflects a current expectation that revenue for both the Standard Products Group and Foundry Services Group will show sequential improvement as compared to Q2 2019.
Gross profit margin to be in the range of 22% to 24%, as compared to 21.4% in the second quarter of 2019 and 27.1% in the third quarter of 2018. Gross margin guidance for the third quarter primarily reflects the current expectation that fab utilization will show sequential improvement from the second quarter of 2019.

CEO YJ Kim comments on Q2
Revenue of $205.1 million increased 30.4% sequentially from Q1, as results in each of our three business lines surpassed expectations in Q2. Our OLED and Power businesses each achieved record revenue, driven by robust customer demand for our low-power display drivers and high-voltage Power standard products. The Foundry business showed resilience in a tough macroeconomic environment, with revenue increasing sharply from Q1.

At the end of April on our Q1 earnings call, we provided Q2 revenue guidance of $173-181 million, and a range for gross profit margin of 16-18%. When it became evident that we were on track to significantly exceed the high end of the guidance range, we provided an updated guidance on June 11 for revenue of at least $194 million and gross margin of at least 21%.

Gross profit margin of 21.4% in Q2 met the updated guidance and our total revenue of $205.1 million during the same period significantly exceeded the updated guidance. The better-than-expected revenue performance was due to stronger-than-expected customer demand across the board and throughout the quarter. OLED revenue increased 50.4% sequentially, Power increased 13.5% and Foundry increased 28.1%, all as compared to Q1 2019.

Our OLED business benefited from the launch of six new OLED smartphones in Asia. We also secured four new design wins. Our 40-nm display driver accounted for the majority of our OLED revenue in Q2 but our industry leading 28-nm display driver now has entered mass production and will be a key revenue driver going forward. The pickup in revenue from the Power business reflected healthy demand from television, industrial and smartphone markets, with our Premium products accounting for over half of Power revenue. The improvement in the Foundry business reflected increased customer demand, primarily for applications in the computer and consumer end markets, and also from smartphones.

As for the strategic evaluation of the Foundry business and Fab 4, I’m encouraged by where we are in the ongoing process. Our decisions regarding the outcome of the strategic evaluation process will be guided by what the Board and management consider to be the best available path to improve MagnaChip’s profitability and to maximize shareholder value.

CFO Jonathan Kim comments on Q2
Gross profit margin of 21.4% met our updated guidance provided in mid-June, and was significantly higher than the guidance range of 16-18% provided at the end of April. The improvement in gross profit margin was due primarily to higher fab utilization as a result of a significant increase in Foundry loading and revenue during Q2, and despite a reserve of $2.2 million related to a legacy display product. Our cash balance increased in Q2 to $123.8 million from $105.8 million in Q1, and inventories declined sequentially. We generated net operating cash flow of $28.8 million in Q2 and $17.2 million in the first half of 2019.

Second Quarter Financial Review
Total Revenue

Total revenue in the second quarter of 2019 was $205.1 million, up 2.7% as compared to reported revenue of $199.7 million from the second quarter of 2018, and up 30.4% from $157.4 million in the first quarter of 2019.

Segment Revenue
Foundry Services Group revenue in the second quarter was $73.1 million, down 9.7% from the second quarter of 2018, and up 28.1% sequentially. Standard Products Group revenue in the second quarter was $132 million, up 11.2% from the second quarter of 2018, and up 31.6% sequentially.

Total Gross Profit and Gross Profit Margin
Total gross profit in the second quarter of 2019 was $43.8 million or 21.4% as a percentage of revenue, as compared with gross profit of $53.9 million or 27% in the second quarter of 2018, and $22.7 million or 14.4% in the first quarter of 2019.

Segment Gross Profit Margin
Foundry Services Group gross profit margin was 16.7% as compared with 27.4% in the second quarter of 2018 and 6.4% in the first quarter of 2019. The sequential improvement in Foundry Services Group’s gross profit margin was primarily due to an increase in fab loading and Foundry revenue. The Standard Products Group gross profit margin was 23.9% in the second quarter of 2019 as compared with 26.6% in the second quarter of 2018 and 19% in the first quarter of 2019. The sequential improvement in Standard Product Group’s gross profit margin was primarily due to an increase in fab loading and increase in our OLED revenues.

Operating Income, Net Income, Adjusted Net Income, Adjusted EBITDA
Operating income of $6.7 million for the second quarter of 2019 compared to operating income of $13.9 million in the second quarter of 2018 and an operating loss of $18.3 million in the first quarter of 2019.

Net loss, on a GAAP basis, was $9.5 million or $0.28 per basic and diluted share in the second quarter of 2019 as compared with a net loss of $21.5 million or $0.62 per basic and diluted share in the second quarter of 2018 and net loss of $34.1 million or $1.00 per basic and diluted share in the first quarter of 2019.

Adjusted Net Income, a non-GAAP financial measure, totaled $2.9 million or $0.08 per basic and diluted share in the second quarter of 2019, as compared to Adjusted Net Income of $8.9 million or $0.26 per basic share and $0.23 per diluted share in the second quarter of 2018 and Adjusted Net Loss of $19.9 million or $0.58 per basic and diluted share in the first quarter of 2019.

Adjusted EBITDA, a non-GAAP financial measure, was $17.0 million or 8.3% of revenue in the second quarter of 2019, as compared to Adjusted EBITDA of $23.5 million or 11.8% of revenue in the second quarter of 2018, and Adjusted EBITDA of negative $5.7 million or negative 3.6% of revenue in the first quarter of 2019.

Management believes that non-GAAP financial measures, when viewed in conjunction with GAAP results, can provide a meaningful understanding of the factors and trends affecting MagnaChip’s business and operations and assist in evaluating our core operating performance. However, such non-GAAP financial measures have limitations and should not be considered as a substitute for net income or as a better indicator of our operating performance than measures that are presented in accordance with GAAP. A reconciliation of GAAP results to non-GAAP results is included in this press release.

Cash and cash equivalents totaled $123.8 million in the second quarter of 2019, up from $105.8 million in the first quarter of 2019.

Second Quarter 2019 and Recent Company Highlights

MagnaChip announced:

A new low-Rss (on)* LV (Low Voltage) MOSFET with reduced chip size for smartphone battery PCMs (Protection Circuit Modules). Extended life and increased protection for batteries in high-end LTE and 5G smartphones are becoming increasingly important. 5G phones, in particular, need longer-lasting batteries with higher endurance than previous smartphones to process the massive amount of data with extremely fast download and upload capabilities. Inserted in the battery PCMs in LTE or 5G phones, this newly released MOSFET prevents over-voltage and over-current of the batteries and ultimately helps extend their life and resolve the overheating issue.
http://investors.magnachip.com/news-releases/news-release-details/magnachip-introduces-new-component-enhance-5glte-smartphone

An update to its previous guidance for the second quarter of 2019. Revenue in the second quarter of 2019, ending June 30, is now expected to be at least $194 million, and gross profit margin is expected to be at least 21%. This updated guidance for the second quarter compares to the Company’s previous guidance of revenue to be in the range of $173-181 million and gross profit margin to be in the range of 16-18%. The previous revenue guidance provided on April 30 in conjunction with the public release of the financial results for the first quarter of 2019 reflected an expectation at that time that revenue from MagnaChip’s OLED Display drivers would increase by approximately 30% and that revenue from the Foundry business would be flat, both as compared to the first quarter of 2019. However, revenue for both OLED Display drivers and 8″ Foundry services is now expected to substantially exceed the Company’s previously anticipated financial results for the second quarter. Revenue from Power standard products is also expected to be stronger than previously anticipated.
MagnaChip also stated today that the strategic evaluation of its Foundry business and Fab 4, the larger of the Company’s two 8″ manufacturing facilities, is ongoing. Fab 4 is an analog and mixed-signal fab that produces approximately 73% of the Company’s total capacity, and is used primarily to meet wafer demand from Foundry customers that rely on outside suppliers. As previously announced, the strategic evaluation includes a range of possible options, including, but not limited to, joint ventures, strategic partnerships and M&A possibilities. MagnaChip’s updated revenue and gross profit margin guidance for the second quarter of 2019 is not a comprehensive statement of financial results, and actual figures may vary.
http://investors.magnachip.com/news-releases/news-release-details/magnachip-semiconductor-provides-updated-guidance-q2-2019

The launch of its 28-nanometer (nm) OLED (Organic Light Emitting Diodes) DDIC (Display Driver IC) for smartphone displays.
The 28nm process is the most advanced process used for manufacturing OLED DDICs today. The new 28nm OLED DDIC achieves a form factor reduction that is 20 percent smaller than that of the previous 40nm process and is suitable for smartphones and other mobile devices, where small size and thinness are critical factors. In addition, MagnaChip reduced the logic voltage from 1.1V, which was required for the existing 40nm products, to 1.0V, which reduces the current voltage consumption by more than 20 percent and also extends battery life.
http://investors.magnachip.com/news-releases/news-release-details/magnachip-launches-28-nanometer-oled-ddic-smartphone-displays

The offering of its second-generation 0.13 micron eFlash (Embedded Flash) technology with 20V and 30V high-voltage options. The technology is specifically designed to address the needs for multi-function hybrid mixed-signal products, including touch ICs, fingerprint readout ICs and wireless power charger ICs. With the growing complexity of analog and mixed-signal functions, IC designers are facing increasing challenges to integrate multiple functions in a single product.
http://investors.magnachip.com/news-releases/news-release-details/magnachip-offers-second-generation-013-micron-embedded-flash-20v

The launch of a 3-channel BLU (backlight unit) LED driver for UHD TVs.
For high-resolution UHD displays, this new standard display product is designed to control the local LED dimming of up to 270 LEDs through a maximum of 90 LEDs per channel. In addition, it provides a dual dimming solution with Analog and PWM (Pulse Width Modulation) for efficient and stable LED dimming, which reduces power consumption and helps achieve a high contrast ratio in UHD TVs.
http://investors.magnachip.com/news-releases/news-release-details/magnachip-launches-3-channel-blu-led-driver-uhd-tvs

A new initiative to partner with companies in the development of next-generation display features of smartphones and other mobile or handheld consumer electronic devices. MagnaChip intends to develop individual strategic partnerships with leading manufacturers of touch, stylus, fingerprint technologies, and associated OLED display technologies. Each company will collaborate with MagnaChip to develop and standardize innovative human-interface solutions based upon smart touch, stylus and fingerprint technologies that are suitable for MagnaChip’s industry leading OLED DDICs. The goal in each instance will be to improve the functionality of OLED displays on end user devices. There also will be a specified collaboration in shared intellectual property that will extend into new applications, including the IoT and automotive sectors.
http://investors.magnachip.com/news-releases/news-release-details/magnachip-announces-initiative-develop-next-generation-display

A partnership with ELAN Microelectronics Corp. to expand the capabilities for OLED displays for a wide variety of next-generation consumer, communication, computing and industrial products, as well as for automotive displays. The partnership seeks to build upon the recent growth and market penetration of OLED displays in areas such as smartphones, mobile devices, tablets and automotive applications, ranging from navigation and infotainment screens to brake light and interior lighting systems.
http://investors.magnachip.com/news-releases/news-release-details/magnachip-and-elan-microelectronics-announce-partnership-expand

A partnership with HiDeep to develop advanced OLED display capabilities for smartphone makers and other handheld consumer electronics devices. MagnaChip will cooperate with HiDeep to develop enhanced HMI solutions optimized for the growing OLED display market. Specifically, MagnaChip and HiDeep will collaborate and create useful and cost effective new HMI solutions for flexible OLED displays for top-tier panel makers and smartphone OEMs. This collaboration also will extend into a variety of other applications and end markets. http://investors.magnachip.com/news-releases/news-release-details/magnachip-and-hideep-inc-announce-partnership-develop-enhanced

A partnership with Melfas Inc. to develop advanced OLED display capabilities for the automotive and consumer electronics sectors. Currently, OLED technology is deployed primarily in televisions and mobile products such as smartphones and smartwatches, but MagnaChip and Melfas are working towards developing automotive display-related solutions in an effort to respond to this fast-growing market. With their current solutions, the two companies will initially address opportunities in consumer electronics and, going forward, will work together to develop solutions for OLED displays in automotive applications.
http://investors.magnachip.com/news-releases/news-release-details/magnachip-and-melfas-inc-announce-partnership-collaborate-oled

Second Quarter 2019 Earnings Conference Call
The earnings conference call will be webcast live today (July 30, 2019) at 5:00 p.m. EDT, and also is available by dialing toll-free at 1-844-536-5472. International call-in participants can dial 1-614-999-9318. The conference ID number is 8938259. Participants are encouraged to initiate their calls at least 10 minutes in advance of the 5 p.m. ET start time to ensure a timely connection. The webcast and earnings release will be accessible at www.magnachip.com. A replay of the conference call will be available the same day and will run for 72 hours. The replay dial-in numbers are 1-404-537-3406 or toll-free at 1-855-859-2056. The access code is 8938259.

About MagnaChip Semiconductor Corporation
MagnaChip is a designer and manufacturer of analog and mixed-signal semiconductor platform solutions for communications, IoT, consumer, industrial and automotive applications. The Company’s Standard Products Group and Foundry Services Group provide a broad range of standard products and manufacturing services to customers worldwide. MagnaChip, with about 40 years of operating history, owns a portfolio of approximately 3,000 registered patents and pending applications, and has extensive engineering, design and manufacturing process expertise. For more information, please visit www.magnachip.com. Information on or accessible through, MagnaChip’s website is not a part of, and is not incorporated into, this release.

Safe Harbor for Forward-Looking Statements
Information in this release regarding MagnaChip’s forecasts, business outlook, expectations and beliefs are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995 that involve risks and uncertainties. These statements include statements about our future operating and financial performance, including but not limited to third quarter 2019 revenue and gross profit margin expectations. All forward-looking statements included in this release are based upon information available to MagnaChip as of the date of this release, which may change, and we assume no obligation to update any such forward-looking statements. These statements are not guarantees of future performance and actual results could differ materially from our current expectations. Factors that could cause or contribute to such differences include general economic conditions, the impact of competitive products and pricing, timely design acceptance by our customers, timely introduction of new products and technologies, ability to ramp new products into volume production, industry wide shifts in supply and demand for semiconductor products, industry and/or company overcapacity, effective and cost efficient utilization of manufacturing capacity, financial stability in foreign markets and the impact of foreign exchange rates, unanticipated costs and expenses or the inability to identify expenses which can be eliminated, compliance with U.S. and international trade and export laws and regulations by us and our distributors, and other risks detailed from time to time in MagnaChip’s filings with the SEC, including our Form 10-K filed on February 22, 2019 and subsequent registration statements, amendments or other reports that we may file from time to time with the SEC and/or make available on our website. MagnaChip assumes no obligation and does not intend to update the forward-looking statements provided, whether as a result of new information, future events or otherwise.

CONTACTS:
In the United States:
Bruce Entin
Investor Relations
Tel. +1-408-625-1262
Investor.relations@magnachip.com

In Korea:
Chankeun Park
Director, Public Relations
Tel. +82-2-6903-5223
chankeun.park@magnachip.com

SEOUL, South Korea and SAN JOSE, Calif., July 10, 2019 /PRNewswire/ — MagnaChip Semiconductor Corporation (“MagnaChip”) (NYSE: MX) announced today it will host a conference call on Tuesday, July 30, 2019 at 5 p.m. ET to discuss the Company’s financial results for the second quarter of 2019. Participating in the call will be YJ Kim, MagnaChip’s CEO and Jonathan Kim, Executive Vice President and CFO. The earnings press release will be issued after the market closes that day.

The conference call will be webcast live and also is available by dialing toll-free at 1-844-536-5472. International call-in participants can dial 1-614-999-9318. The conference ID number is 8938259. Participants are encouraged to initiate their calls at least 10 minutes in advance of the 5 p.m. ET start time to ensure a timely connection. The webcast and earnings release will be accessible at www.magnachip.com.

A replay of the conference call will be available the same day and will run for 72 hours. The replay dial-in numbers are 1-404-537-3406 or toll-free at 1-855-859-2056. The access code is 8938259.

About MagnaChip Semiconductor
MagnaChip is a designer and manufacturer of analog and mixed-signal semiconductor platform solutions for communications, IoT, consumer, industrial and automotive applications. The Company’s Standard Products Group and Foundry Services Groups provide a broad range of standard products and manufacturing services to customers worldwide. MagnaChip, with about 40 years of operating history, owns a portfolio of approximately 3,000 registered patents and pending applications, and has extensive engineering, design and manufacturing process expertise.

For more information, please visit www.magnachip.com. Information on or accessible through, MagnaChip’s website is not a part of, and is not incorporated into, this release.

CONTACTS:
In the United States:
Bruce Entin
Investor Relations
Tel. +1.408.625.1262
Investor.relations@magnachip.com

In Korea:
Chankeun Park
Director, Public Relations
Tel. +82.2.6903.3195
chankeun.park@magnachip.com

Low-Rss(on) LV MOSFET for Battery Protection Circuit Modules

 

SEOUL, South Korea and SAN JOSE, Calif., June 26, 2019 /PRNewswire/ — MagnaChip Semiconductor Corporation (“MagnaChip” or the “Company”) (NYSE: MX), a designer and manufacturer of analog and mixed-signal semiconductor products, announced today a new low-Rss(on)* LV (Low Voltage) MOSFET with reduced chip size for smartphone battery PCMs (Protection Circuit Modules).

Extended life and increased protection for batteries in high-end LTE and 5G smartphones are becoming increasingly important. 5G phones, in particular, need longer-lasting batteries with higher endurance than previous smartphones to process the massive amount of data with extremely fast download and upload capabilities. Inserted in the battery PCMs in LTE or 5G phones, this newly released MOSFET prevents over-voltage and over-current of the batteries and ultimately helps extend their life and resolve the overheating issue.

The Rss(on) of this new product, 20 percent lower than previous versions with the same chip size, prolongs the life of smartphone batteries by decreasing current loss and improving heat dissipation. This lower Rss(on) also enables higher-power density than previous versions to prevent over-heating of the battery during a quick charge (a feature supported by most of the latest smartphones). PCM functionality is also enhanced by an ESD (Electrostatic Discharge) protection diode added to the product. This diode mitigates ESDs of ≤ 2 kV to strengthen circuit protection and prevents damage to other smartphone components.

MagnaChip also has reduced the chip size of this new MOSFET by 10 percent (as compared to other LV MOSFETs currently on the MagnaChip portfolio), which offers greater design flexibility for circuit designers and even shrinks the PCM itself. With this reduction in size, WLCSP (Wafer Level Chip Scale Package) is possible for this product.

“Quick charging, fast processor speeds and other advanced specifications for new LTE and 5G smartphones require power products that provide superlatively high levels of battery protection,” said YJ Kim, CEO of MagnaChip. “We are working closely with the OEM community to decrease the footprint of our MOSFETs and incorporate other product enhancements to meet these objectives.”

* Rss(on): On resistance, the resistance value between the drain and source of a MOSFET during operation (ON)

About MagnaChip Semiconductor
MagnaChip is a designer and manufacturer of analog and mixed-signal semiconductor platform solutions for communications, IoT, consumer, industrial and automotive applications. The company’s Standard Products Group and Foundry Services Group provide a broad range of standard products and manufacturing services to customers worldwide. MagnaChip, with about 40 years of operating history, owns a portfolio of approximately 3,000 registered patents and pending applications, and has extensive engineering, design and manufacturing process expertise. For more information, please visit www.magnachip.com.

CONTACTS:
United States (Investor Relations):
Bruce Entin
Entin Consulting
Tel. +1-408-625-1262
Investor.relations@magnachip.com

USA media / industry analysts:
Mike Newsom
LouVan Communications, Inc.
Tel. +1-617-803-5385
mike@louvanpr.com

Korea / Asia media:
Chankeun Park
Director of Public Relations
Tel. +82-2-6903-5223
chankeun.park@magnachip.com

MagnaChip Semiconductor Provides Updated Guidance for Q2 2019 Financial Results

– Revenue now expected to be at least $194 million, as compared to previous estimate of $173-181 million
– Gross profit margin expected to be at least 21%, as compared to previous estimate of 16-18%
– Strategic evaluation process for Foundry business and Fab 4 remains ongoing

SEOUL, South Korea and SAN JOSE, Calif., June 11, 2019 /PRNewswire/ — MagnaChip Semiconductor Corporation (NYSE: MX) today provided an update to its previous guidance for the second quarter of 2019.

Revenue in the second quarter of 2019, ending June 30, is now expected to be at least $194 million, and gross profit margin is expected to be at least 21%. This updated guidance for the second quarter compares to the Company’s previous guidance of revenue to be in the range of $173-181 million and gross profit margin to be in the range of 16-18%. The previous revenue guidance provided on April 30 in conjunction with the public release of the financial results for the first quarter of 2019 reflected an expectation at that time that revenue from MagnaChip’s OLED Display drivers would increase by approximately 30% and that revenue from the Foundry business would be flat, both as compared to the first quarter of 2019. However, revenue for both OLED Display drivers and 8″ Foundry services is now expected to substantially exceed the Company’s previously anticipated financial results for the second quarter. Revenue from Power standard products is also expected to be stronger than previously anticipated.

MagnaChip also stated today that the strategic evaluation of its Foundry business and Fab 4, the larger of the Company’s two 8″ manufacturing facilities, is ongoing. Fab 4 is an analog and mixed-signal fab that produces approximately 73% of the Company’s total capacity, and is used primarily to meet wafer demand from Foundry customers that rely on outside suppliers. As previously announced, the strategic evaluation includes a range of possible options, including, but not limited to, joint ventures, strategic partnerships and M&A possibilities.

MagnaChip’s updated revenue and gross profit margin guidance for the second quarter of 2019 is not a comprehensive statement of financial results, and actual figures may vary. The Company expects to announce full financial results for the second quarter on July 30 at 4:05 p.m. ET, and will host an investor conference call a 5 p.m. ET on the same day.

About MagnaChip Semiconductor Corporation
MagnaChip is a designer and manufacturer of analog and mixed-signal semiconductor platform solutions for communications, IoT, consumer, industrial and automotive applications. The Company’s Standard Products Group and Foundry Services Group provide a broad range of standard products and manufacturing services to customers worldwide. MagnaChip, with about 40 years of operating history, owns a portfolio of approximately 3,000 registered patents and pending applications, and has extensive engineering, design and manufacturing process expertise. For more information, please visit www.magnachip.com. Information on or accessible through, MagnaChip’s website is not a part of, and is not incorporated into, this release.

Safe Harbor for Forward-Looking Statements
Information in this release regarding MagnaChip’s forecasts, business outlook, expectations and beliefs are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995 that involve risks and uncertainties. These statements include statements about our future operating and financial performance, including second quarter 2019 revenue and gross profit margin expectations. All forward-looking statements included in this release are based upon information available to MagnaChip as of the date of this release, which may change, and we assume no obligation to update any such forward-looking statements. These statements are not guarantees of future performance and actual results could differ materially from our current expectations. Factors that could cause or contribute to such differences include general economic conditions, the impact of competitive products and pricing, timely design acceptance by our customers, timely introduction of new products and technologies, ability to ramp new products into volume production, industry wide shifts in supply and demand for semiconductor products, industry and/or company overcapacity, effective and cost efficient utilization of manufacturing capacity, financial stability in foreign markets and the impact of foreign exchange rates, unanticipated costs and expenses or the inability to identify expenses which can be eliminated, compliance with U.S. and international trade and export laws and regulations by us and our distributors, and other risks detailed from time to time in MagnaChip’s filings with the SEC, including our Form 10-K filed on February 22, 2019 and subsequent registration statements, amendments or other reports that we may file from time to time with the SEC and/or make available on our website. MagnaChip assumes no obligation and does not intend to update the forward-looking statements provided, whether as a result of new information, future events or otherwise.

CONTACTS:
In the United States:
Bruce Entin
Investor Relations
Tel. +1-408-625-1262
investor.relations@magnachip.com

In Korea:
Chankeun Park
Director, Public Relations
Tel. +82-2-6903-5223
chankeun.park@magnachip.com